Call Us Now !
2KW 48VDC Solar Single Phase Inverter with MPPT Charger Controller [SOLAR PCU-SPH 2KW 48VDC]
2KW 48VDC Solar Single Phase Inverter with MPPT Charger Controller [SOLAR PCU-SPH 2KW 48VDC]

2KW Single Phase Solar Inverter

Solar / Single Phase Inverter
2KW 48VDC Solar Single Phase Inverter with MPPT Charger Controller
Part No: SOLAR PCU-SPH 2KW 48VDC
Discontinued
Specifications, Prices & Availability may change without notice. Images are for illustration purposes only. E&OE

Overview

True bi-directional inverters with MPPT charge controller designed especially for solar application. These single & three phase output inverters operate in parallel with the grid utility. Solar electricity is produced when Photons from the sun rays hit Photovoltaic panels, and electrons are generated in the Photovoltaic cells, leading to production of Direct Current (DC).

The electrical energy in form of DC power is used to charge the batteries through a charge controller and also used to cater load through inverter. These PCU’s (Power Conditioning Units) are so designed that additional energy generated from Solar PV plants can be exported to the grid.*

Features

  • Bi-directional Solar Inverter with MPPT Charge Controller
  • Inverter with High Speed MOSFET/IGBT and state of the Art DSP Controller High Efficiency and Reliability
  • In-built in output isolation transformer
  • Remote monitoring available

Specifications

  • System Rating (KW) : 2KW
Photovoltaic Input
  • MPPT Voltage : 65V-90V DC
  • Maximum Input Current (A) : 30A
  • Maximum PV power recommended (KW) : 2.2KW
  • No. of Charge Controller : 1
MPPT Base Charge Controller
  • Switching Element : MOSFET/IGBT
  • Type of Charger : PWM with MPPT
Grid Input
  • Input Supply_Phase : 1 Phase 2 Wire
  • Nominal Voltage & Voltage Range : 115VAC/230VAC (15%,-20%)
Battery
  • Battery Voltage : 48V
  • Battery recharge current setting range from Grid Side : 19A
  • Battery recharge current setting range from Array Side : 39A
Inverter
  • Switching Element : MOSFET/IGBT
  • Control : 32 Bit DSP Controlled
  • Nominal Output Voltage : 115VAC/230VAC; L-N
  • Output Supply Phase : 1 Phase 2 wire
  • Output waveform : Sine Wave
  • Nominal Frequency_(Hz) : 50/60 Hz
  • Power Factor (Within KVA/KW) : 0.6 lag to 1 (Within KVA and KW rating)
  • Nominal Output Current (A) : 9A/18A
  • Voltage regulation : ±2%
  • Voltage Stability in dynamic condition : Complies with IEC/EN 62040-3, Class 1
  • Output voltage distortion with 100% linear load : < 2%
  • Overload at nominal output voltage for 10 minutes : 125%
  • Overload at nominal output voltage for 1 minute : 150%
  • Inverter peak efficiency (Ref. STD IEC 61683 : Up to 90%
  • Noise @ 1 meter (dBA +/-2dBA) : <58DbA
  • Protection degree with open doors : IP20
  • Colour : RAL 7016 Texture
  • Dimension (WxDxH in mm) : 150*620*500
  • Cooling : Forced Air
  • Galvanic Isolation : Inbuilt isolation transformer at inverter output
Environment
  • Location : Indoor (Free from corrsive gases & conductive dust)
  • Temperature Operating : 0-40°C
  • Max. Relative humidity @25°C (non-condensing) : Up to 95%
  • Max. Altitude above sea level without de-rating (m) : 1000m (For higher altitude complies with IEC/EN 62040-3)
Standard Compliance
  • Testing : IEC

Additional Information

Brand Luminous
Power 2KW
Input Voltage 48VDC

Downloads

PDF File
2.31 MB

Copyright © 2024, Communica (Pty) Ltd.

Communica is a wholesale and retail distributor of semiconductors, electromechanical and passive electronic components for automotives, electronics, electrical, automation, mining and process control industries and technical and tertiary educational institutions. We also offer a large range of security and CCTV equipment, power supplies, test instruments and accessories, tools and production equipment, prototyping platforms, and hobby and educational products.