Tenda's TEF1118P is a 18 x Port 10/100Mbps Gigabit switch with 16 x 802.3af/at PoE ports and 1 x Gigabit / SFP Combo uplink port. The switch offers a maximum PoE power budget of 135W , up to 30W per port. This can supply power to and exchange data with AP's, IP cameras together with IP phones supporting the 802.3af/at standard. It also provides simple management modes such as CCTV (QOS on ports 1-8), VLAN (Port Isolation) and Extender mode (250m PoE at 10mbps). The switch also provides 6KV lightning protection.
Standard & Protocol: IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3af MTBF: ≥100,000 hours
Indicator
- 16 x Link/Act per device
- 1x G1 Link/Act per device
- 1x SFP Link/Act per device
- 1x PoE-MAX per device
- 1x Power per device
Interface
- 16x 10/100Base-TX ports (Data/Power)
- 1x 10/100/1000Base-T port (Data)
- 1x 1000Base-X SFP port
- Lightning Protection: 6KV
- Store & Forward: Yes
- Exchange capacity: 7.2 Gbit/s
- Packet Forwarding Rate: 5.36Mpps
- MAC Address Table: 4K
- PoE supply management: Port 1 to Port 16 support IEEE802.3at/af POE standard
- PN pass-through: 1 2 4 5 +,3 6 7 8 -
- Input Power AC:100-240V~ 50/60Hz
- Power Consumption: In full configuration:<150W
- PoE Max Power Supply:135W
- Operating Temperature: 0℃~40℃
- Storage Temperature: -40℃~70℃
- Operating Humidity: 10%~90% non-condensing
- Storage Humidity: 5%~90% non-condensing
- Dimensions: 294 x 178 x 44mm (W x D x H)