1. Catalog
    2. >
  2. Consumer Electronics
    3. >
  3. Security & Alarms
    4. >
  4. IDS Alarms
KODAK Pure Sine Wave Off-Grid Inverter 5KW 48V, Built-in MPPT, Max Solar Chrge Current: 80A, Max PV Array PWR:4000W OCV:145VDC, I/P:230VAC, MPP Range @ Operating Voltage:60~ 115VDC, USB/RS485/Bluetooth/Dry-Contact, {140x303x525mm}, 13.5kg [KDK OG-5.48+]
KODAK Pure Sine Wave Off-Grid Inverter 5KW 48V, Built-in MPPT, Max Solar Chrge Current: 80A, Max PV Array PWR:4000W OCV:145VDC, I/P:230VAC, MPP Range @ Operating Voltage:60~ 115VDC, USB/RS485/Bluetooth/Dry-Contact, {140x303x525mm}, 13.5kg [KDK OG-5.48+]
Kodak

Pure Sine Wave Off-Grid Inverter

Pure Sine Wave Off-Grid Inverter

KDK OG-5.48+
KODAK Pure Sine Wave Off-Grid Inverter 5KW 48V, Built-in MPPT, Max Solar Chrge Current: 80A, Max PV Array PWR:4000W OCV:145VDC, I/P:230VAC, MPP Range @ Operating Voltage:60~ 115VDC, USB/RS485/Bluetooth/Dry-Contact, {140x303x525mm}, 13.5kg
11,206.20 ZAR
inc
for 1 Each
1 in Stock
Add
Specifications, Prices & Availability may change without notice. Images are for illustration purposes only. E&OE

Features

  • KODAK Off-grid inverter with UPS
  • In rural or end-of-line locations, the AC grid voltage can fluctuate across a wide range. Voltage that is sufficently far from the nominal 230V can cause applicances to run much less efficiently, or make them unable to function. 
  • Most other inverters that are capable of running in Island Mode simply pass through the variable grid voltage and only produce a smooth 230V supply in the event of a grid failure. 
  • Kodak's King Off-Grid inverter is perfect for areas where grid electricity is less stable because it produces smooth 230V AC at all times, whether the grid is available or not.
  • This is great for efficient running of applicances, but crucial for an uninterrupted supply for important loads such as servers or ATMs. 
  • Built-in Bluetooth for mobile monitoring Detachable LCD control module with multiple communications (Android App is available)
  • Supports USB On-the-Go function
  • Reserved communication port for BMS (RS485)
  • Parallel operation up to 9 units
  • Robust UPS (uninterrupted power supply) for essential loads with zero transfer time

Specifications

  • Rated Power : 5000VA/5000W
  • Parallel Capability : Up to 8 units

Input

  • Voltage : 230 VAC
  • Voltage Range : 110-280 VAC
  • Frequency Range : 50 Hz/60 Hz (Auto sensing) 4Hz
  • Max IC : 50A
  • Max Isc : 60A

Output

  • AC Voltage Regulation (Batt. Mode) : 230VAC ± 5%
  • Frequency Range (Synchronized Range) : 46~54 Hz or 56~64 Hz
  • Frequency Range (Batt. Mode) : 50 Hz 0.1 Hz or 60Hz 0.1 Hz
  • Surge Power : 10000VA for 5 seconds
    • Transfer Time  : 0ms
    • Inverter to Bypass : 4 ms (Typical)
  • Waveform : Pure sine wave
  • Max. Charger Rate : 5 minutes

Efficiency

  • Battery Voltage ; 48 VDC
  • Floating Charge Voltage : 54 VDC
  • Overcharge Protection : 66 VDC

Solar Charger & AC Charger

  • Solar Charger Type : MPPT
  • Maximum PV Array Power : 4000 W
  • MPP Range @ Operating Voltage : 60~115VDC
  • Maximum PV Array Open Circuit Voltage : 145 VDC
  • MPPT Maximum Input Current : 60 A
  • Maxmum Solar Charge Current : 80 A
  • Maximum AC Charge Current : 60 A

Physical

  • Dimension, D x W x H (mm) : 140 x 303 x 525
  • Net Weight (kgs) : 13.5
  • Communication Interface : USB/RS232/RS485/Wifi/Dry-contact
  • IP Rating : IP21

Environment

  • Altitude : 1000m and de-rate by 1% for every 100m above 1000m
  • Humidity : 5% to 95% Relative Humidity (Non-condensing)
  • Operating Temperature : -10°C to 50°C (with over-temp protection in case inner component temperature reaches protection level.)
  • Storage Temperature : -15°C to 60°C
  • Noise Level (dB) : <55

 

Downloads

PDF File
159.37 KB
PDF File
187.63 KB