Catalog > Consumer Electronics > Power Supplies > Battery Chargers Victron Bluesolar PWM DUO Solar Charge Controller Bluesolar PWM DUO Solar Charge Controller VICT BLUESOLAR PWMD 12-24 20A Victron Bluesolar PWM DUO Solar Charge Controller 12/24V 20A , 2 x USB Ports 5V/2A , LCD Display , Terminal size:16 mm²/AWG6 , IP20 883.50 ZAR inc for 1 Each 4 in Stock Add Specifications, Prices & Availability may change without notice. Images are for illustration purposes only. E&OE Features Liquid crystal display. For status monitoring and set-up External Temperature sensor included 2 Separate Battery outputs. Charges two separate batteries. For example, the starter battery and the service battery of a boat or mobile home. Protections. Protected against reverse polarity connection of the solar panels and/or battery Programmable battery charge algorithm. Algorithms for AGM, GEL or Flooded lead-acid batteries and LiFePO4 batteries (with internal BMS). Two 5 Volt USB outputs. Maximum current of the two outputs combined: 2A Specifications Battery Voltage : 12/24 V with automatic system voltage detection [for LiFePO4 no automatic system voltage detection] Rated charge current: 20A Second battery output:Yes Load output: 2 USB ports 5V/2A Automatic load disconnect: 10.5V/21V Maximum solar voltage: 28V / 55V (1) Self-consumption: 10 mA Protections: Battery reverse polarity (fuse) Over temperature Grounding: Common negative Operating temp. range: -35 to +55°C (full load) Humidity (non-condensing): Max 95% DEFAULT SETTINGS Charge voltage 'absorption' (2): 14.4V / 28,8V Charge voltage 'float' (2): 13.7V / 27,4V Battery temperature sensor: Yes, remote sensor [included] Temperature compensation: -30mV/oC / -60mV/oC ENCLOSURE Protection class:IP20 Terminal size: 16 mm2 / AWG6 Weight: 0,3kg Dimensions:(h x w x d) 101.5 x 184.0 x 47.1 mm [4.0 x 7.4 x 1.8 inch] STANDARDS Safety: IEC 62109-1 EMC: EN 61000-6-1, EN 61000-6-3, ISO 7637-2 Downloads Data Sheet PDF File 153.57 KB