The K5020 is a 3 channel data logger for multiple parameter recording of voltage and current. The clamp sensors and or voltage sensors can be connected to any of the 3 channels as the logger will automatically identify the sensors connected. The Power Quality analysis mode is for 1 Phase only: Reference Voltage, Swell, Dip and Short Power Interruptions. Variation of the measured voltage and current data can be confirmed simultaneously on the PC display monitor. Supplied with the user friendly software KEW LOG Soft 2, the recorded data can be transmitted to a PC directly by using the USB connection, whereby the data can then be edited for analysis and graphically displayed.

• LED flickers when the preset current/voltage value is exceeded
• Continuous measuring time approximately 10 days
• Various measurements are available with 4 recording modes - Normal, Capture, Trigger and Power Quality Analysis
• Lowpass Filter will filter out the higher frequency harmonics
• Selection of One-time mode or Endless mode
• Confirmation of recorded data displayed on LCD
• Light Weight at 645g
• K5020 has Simplified Power integration where KEW LOG Soft 2 uses current & Voltage recorded to calculate the integral power consumption
• Dowload data to PC via USB Interface cable
• Non Volatile Memory will retain recorded data even if batteries are exhausted