Catalog > Test and Measurement > Test and Measurement Instruments > Multimeters > Digital Multimeters Catalog > Test and Measurement > Test and Measurement Instruments > Major Tech Instruments LED Voltage Tester LED Voltage Tester MAJ MT474 LED Voltage Tester 1,556.10 ZAR inc for 1 Each 1 in Stock Add Specifications, Prices & Availability may change without notice. Images are for illustration purposes only. E&OE Overview The MT474 is a 690V AC/DC Voltage Tester and is a designed to meet electrician’s requirements for a multitude of applications. The tester displays the voltage on red LED’s which increment as the voltage increases. There is an LED indication for polarity when DCV is measured. No switching of the meter on as the tester automatically turns on when voltage is applied to the two test probes. The MT474 incorporates a Low Impedance Test, which induces a basic load of approximately 6kΩ at 690 volts. The voltage tester can show the direction of the rotating field with three-phase systems, with the direction of field shown as L = anticlockwise and R = clockwise. The tester can be used as a Single Pole phase tester and measure continuity up to 400kΩ plus RCD Test. The MT474 meets the CAT IV 600V and CAT III 1000V safety standards. Features AC & DC Voltage detection from 12V to 690V Phase Rotation LED display Single pole phase test set Double Injection IP64 housing Low Impedance test Built-in Flashlight Polarity Detection Rotary Field indication Continuity test to 400kΩ Accessories: Test Probe Covers for CATIV 600V Instruction manual Specifications DC Voltage 12 – 690V DC Voltage accuracy ±(30%) AC Voltage 12 – 690V AC voltage accuracy ±(30%) Rotary field 100-690V Continuity Yes Continutity resolution greater than/equal to 400kΩ AC Bandwidth 50Hz to 60Hz Digital Display LED Indication Polarity Indication Yes Over-range indication Yes Low Input impedance Greater than 200kΩ Flash Light Yes Enclosure Double injection IP64 Power source 2 x R03 (not supplied) Weight 255g Dimensions 150 x 70 x 48mm