Catalog > Consumer Electronics > Power Supplies > Battery Chargers 6/12V 1800mA Desktop Lead Acid Battery Charger Lead Acid 6V / 12V Battery Charger MW126C18GS CHARGER LEAD-ACID 6V&12V 1,8A DESKTOP Discontinued Specifications, Prices & Availability may change without notice. Images are for illustration purposes only. E&OE Overview This battery charger is designed for use with 6V or 12V Lead Acid Batteries. There is a built-in polyswitch for over-current protection and polarity-reverse protection. This ensures that the battery would not be damaged during charge. A set of Crocodile Clips and a detachable output plug are included. The battery voltage in selected via the switch on the front of the unit. Features Operating InstructionPlug the detachable plug or the crocodile clips into the output lead of the chargerPlug the unit into mains supply and the red LED will turn onSelect the appropriate battery voltage (6V/ 12V) by using the switch on the front of the unitUse the crocodile clips to connect to the appropriate terminals on the battery, or plug the detachable plug into the battery pack if applicableThe charging process commencesThe recommended charge current for lead acid batteries is around 10% of battery capacity : Example - Battery 12V 15Ah, Charging current - 1.5APleas also note charging instructions of the battery manufacturerWarningDo not use outdoor or in area of high humidityIf the external flexible cable is damaged, it shall be replaced by the manufacturer of his service agent or a similar qualified person in order to avoid a hazardUse this charger with 6V or 12V Lead Acid batteries only Specifications Input Voltage : AC 230V ~ 50Hz 39WOutput Voltage : 6V / 12V DCCharging Current : 1800 mA 21.6VA maxInput Method : DesktopBattery Type : 6/12V Lead Acid BatteryAccessories : With X2-01E / Plug EDimensions : 135x86x75mm