1. Catalog
    2. >
  2. Passive Components
    3. >
  3. Sensors - Transducers
LVDT Signal Conditioner Sensor DIN Rail 24VDC (15-30VDC) 6 Stepped DC Outputs -10 - + 10V /0-20mA/4-20mA. LVDT Range 50 - 5,000 mVRMS. -20 to +75°C. [S2A]
LVDT Signal Conditioner Sensor DIN Rail 24VDC (15-30VDC) 6 Stepped DC Outputs -10 - + 10V /0-20mA/4-20mA. LVDT Range 50 - 5,000 mVRMS. -20 to +75°C. [S2A]

Signal Conditioner Sensor

Signal Conditioner Sensor

S2A
LVDT Signal Conditioner Sensor DIN Rail 24VDC (15-30VDC) 6 Stepped DC Outputs -10 - + 10V /0-20mA/4-20mA. LVDT Range 50 - 5,000 mVRMS. -20 to +75°C.
15,087.90 ZAR
inc
for 1 Each
0 in Stock
Add
Specifications, Prices & Availability may change without notice. Images are for illustration purposes only. E&OE

Features

Functional Features:

  • Cybersecurity lock to prevent tampering
  • Smart calibration by front panel push buttons
  • Color-coded screw terminal plugs
  • Auto-mastering
  • Hot swapability
  • Differential input for superior noise immunity
  • Real-time recalibration

Diagnostic Features:

  • Shorted, disconnected, or open primary
  • Shorted, grounded, disconnected, or open secondaries
  • Output voltage shorts or current loop opens
  • Errors during installation and setup

Specifications

  • Operating Power:
    • +15 to +30 V DC (+24 V nominal), 100 mA max. at 24 V DC;
    • +15 V DC and –15 V DC needed for ±10 V DC bipolar output
  • Analog DC Outputs:
    • 0 - 5 V, 1 - 5 V, 0.5 - 4.5 V, 0.5 - 9.5 V, 0 - 10 V, -10 to +10 V,
    • 0-20 mA sourcing (3-wire), 4-20 mA sourcing (3-wire)
  • Loop Resistance : 850 Ohms maximum with 24 V DC supply
  • Output Non-Linearity : ≤±0.025% of Full Span Output (FSO)
  • Operating Temperature : -20 to 75 C
  • Noise and Ripple : ≤1 mVrms (voltage output); ≤2 μArms (current loop output)
  • Temperature coefficient : ±0.0025% of FSO/deg C (combined span and zero shift)
  • Excitation Frequencies : 1 kHz, 3 kHz, 5 kHz, 10 kHz (nominal)
  • LVDT Output Range : 50 to 5000 mVrms at LVDT’s full scale position
  • Excitation Voltage :
    • 3.0 Vrms (nominal) push-pull drive (factory default)
    • 4.5 Vrms (nominal) push-pull drive (jumper J7 removed)
    • 1.5 Vrms (nominal) single-ended drive for low impedance primary
  • Auto-Master Syncing : Master output controls up to fifteen slave units
  • Fault Detection : Open LVDT winding, shorted or grounded LVDT connection, cable disconnected, voltage output shorted or current loop open
  • Failure Indications : Front panel LEDs; output out of range; NO/NC open-collector switch
  • Null Detection : Front panel LEDs; ±3 V DC max. floating null output signal
  • Zero Set : Front panel push button or RS-485 ASCII command
  • Full Scale Set : Front panel push button or RS-485 ASCII command
  • Digital Interface : RS-485 2-wire multi-drop network, 16 individual addresses
  • Cybersecurity Lock : User enabled

Downloads

PDF File
1.25 MB