1. Catalog
    2. >
  2. Consumer Electronics
    3. >
  3. Batteries and  Battery Accessories
    4. >
  4. Lithium
Pylontech Lithium Ion Rechargeable Battery UF5000 5.12kWh, Voltage:51.2V, Charge/Discharge Max:100A, RS485/CAN, 6000 Cycles, BMS, 1C Rated, DOD:95% (4.864kWh Usable), Parallel Up To 20 Units, 442x452x6x161mm, 42kg [BATT 51,2V100A LI-ION PYL]
Pylontech Lithium Ion Rechargeable Battery UF5000 5.12kWh, Voltage:51.2V, Charge/Discharge Max:100A, RS485/CAN, 6000 Cycles, BMS, 1C Rated, DOD:95% (4.864kWh Usable), Parallel Up To 20 Units, 442x452x6x161mm, 42kg [BATT 51,2V100A LI-ION PYL]

Pylontech Lithium Ion Rechargeable Battery

Battery

BATT 51,2V100A LI-ION PYL
Pylontech Lithium Ion Rechargeable Battery UF5000 5.12kWh, Voltage:51.2V, Charge/Discharge Max:100A, RS485/CAN, 6000 Cycles, BMS, 1C Rated, DOD:95% (4.864kWh Usable), Parallel Up To 20 Units, 442x452x6x161mm, 42kg
17,842.49 ZAR
inc
for 1 Each
0 in Stock
Add
Specifications, Prices & Availability may change without notice. Images are for illustration purposes only. E&OE

Features

Key benefits

  • 5.12 kWh per module, fewer boxes to reach common system sizes.
  • Integrated BMS for pack protection, balancing, and inverter comms.
  • CAN/RS485 communication for smooth setup with popular hybrids.
  • Rack-friendly, front I/O keeps installs neat and serviceable.
  • Designed for frequent cycling, stable LiFePO4 chemistry.

Typical use cases

  • Solar self-consumption, store daytime PV and use it at night.
  • Time-of-use optimisation, charge off-peak and discharge at peak.
  • Backup for essential loads during load shedding.

Installation notes

  • Commission modules to a similar state of charge before paralleling.
  • Use DC cables and protection rated for the bank’s continuous current and fault levels.
  • Provide ventilation space as per the datasheet and avoid heat sources.
  • Ensure correct earthing and bonding of racks and enclosures.
  • This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. SegenSolar will not be held liable for any product malfunctions as a result of incorrectly installed systems.

Technical notes

  • Do not mix battery types in one stack or group, keep UF with UF, UP with UP.
  • Where possible keep modules within similar state of charge before paralleling.
  • Peak values are time-limited and temperature-dependent, design for continuous current.
  • NOTE: The PYLON-UF5000 battery is not compatible with the PYLON-UP5000, PYLON-US3000C, PYLON-US2000C.

 

Specifications

Spec UF5000, newer model
Nominal voltage 51.2 V
Nominal energy 5.12 kWh
Usable energy 4.864 kWh at 95% DoD
Continuous charge or discharge 100 A
Peak current 105–119 A for 15 min, 120–200 A for 15 s
Dimensions and weight 442 W × 452.6 D × 161 H mm, 42 kg
Design life 15 years
Operating temperature, charge −10 to 55 °C
Operating temperature, discharge −10 to 55 °C
Storage temperature −20 to 60 °C
Communications RS485, CAN
Max per battery group 20 modules

Downloads

PDF File
653.17 KB