The new Envisalink EVL-4 Internet module enables Internet remote self monitoring, control and email or SMS alerts for compatible DSC and Honeywell alarm systems whether they are currently being monitored or not. You can check system status and control the system using your iPhone, iPad, Blackberry, Windows Phone or Android device as long as your device has Internet access.

There are no set-up or monthly fees, saving hundreds or thousands over years of use, and installation does not require any complicated port forwarding or fancy networking set-up.

The Envisalink is a perfect addition to your system whether it is professionally monitored or not as it does not interfere with the monitoring of the panel and allows the alarm owner to monitor and control the system from anywhere in the world through an Internet connected device.

vNo alarm programming is required for DSC systems which means you don't even need the installer code. You can add the EVL-4 whether the panel is monitored or not, even if you are locked out of the DSC panel programming.

For Honeywell systems, the installer code and some programming is required.

The Envisalink is secure, as users must enter their PIN code to disarm the system and communications are encrypted. Access and email/SMS alerts are sent via the free Eyez-On cloud portal.

• Enables Internet remote control, status monitoring, email alerts and SMS alerts
• Alerts include alarm, arm, disarm, trouble conditions
• Arm, Disarm, Check system and zone status, bypass zones, trigger PGM output remotely
• Works with iOs, Android, Blackberry and Windows Phone devices and even a PC browser.
• Connects to the alarm panel's keypad connection using standard 4 conductor wire (not included). You may order CB-ZWIREFT4-FT by the foot if needed.
• Connects to your Internet router using standard network patch cable (not included)
• ZERO alarm system programming required for DSC systems. Installer code and some programming required for Honeywell systems.
• No set-up or monthly fees - Free Cloud Service
• Supports e-mail and text alerts to one or multiple contacts
• Line-cut monitoring can notify if system does not 'check-in'
• Compatible with PC1616/PC1832/PC1864 wired Powerseries alarm systems as well as older model Powerseries PC1555, PC1555MX, 1575, 5010, 5020, 832, 864
• Compatible with Honeywell Vista 10P, 15P, and 20P, 21iP, 128P,250P
• Not compatible with DSC PC1550 Classic or older, Alexor, Impassa, 9047
• Connects via keypad bus
• No port forwarding or router set-up required
• Works with dynamic or static IP
• Always on Internet connection required at alarm installation premises
• v1 year warranty

Tested and working with the following panels:

• PC1555 / PC1555 MX
• PC1575
• PC5010 (Power832)
• PC5020 (Power864)
• PC1616
• PC1832
• PC1864
• Vista 10P
• Vista 15P
• Vista 20P
• Vista 21iP
• Vista 128P
• Vista 250P