1. Catalog
    2. >
  2. Test and  Measurement
    3. >
  3. Test and Measurement Instruments
    4. >
  4. Major Tech Instruments
  1. Catalog
    2. >
  2. Test and  Measurement
    3. >
  3. Test and Measurement Instruments
    4. >
  4. Special Function Testers
    5. >
  5. Digital Clamp Meters
Clamp Meter AC 200A 1000V AC/DC, True RMS, 6000 Count, Res:60MΩ, Cap: 4000uF, Diode Test, CAT IV 600V and CAT III 1000V, {230x44x66mm} 259g [MAJ MT715]
Clamp Meter AC 200A 1000V AC/DC, True RMS, 6000 Count, Res:60MΩ, Cap: 4000uF, Diode Test, CAT IV 600V and CAT III 1000V, {230x44x66mm} 259g [MAJ MT715] Clamp Meter AC 200A 1000V AC/DC, True RMS, 6000 Count, Res:60MΩ, Cap: 4000uF, Diode Test, CAT IV 600V and CAT III 1000V, {230x44x66mm} 259g [MAJ MT715] Clamp Meter AC 200A 1000V AC/DC, True RMS, 6000 Count, Res:60MΩ, Cap: 4000uF, Diode Test, CAT IV 600V and CAT III 1000V, {230x44x66mm} 259g [MAJ MT715] Clamp Meter AC 200A 1000V AC/DC, True RMS, 6000 Count, Res:60MΩ, Cap: 4000uF, Diode Test, CAT IV 600V and CAT III 1000V, {230x44x66mm} 259g [MAJ MT715] Clamp Meter AC 200A 1000V AC/DC, True RMS, 6000 Count, Res:60MΩ, Cap: 4000uF, Diode Test, CAT IV 600V and CAT III 1000V, {230x44x66mm} 259g [MAJ MT715]

Clamp Meter AC 200A 1000V AC/DC

AC 200A 1000V AC/DC Clamp Meter

MAJ MT715
Clamp Meter AC 200A 1000V AC/DC, True RMS, 6000 Count, Res:60MΩ, Cap: 4000uF, Diode Test, CAT IV 600V and CAT III 1000V, {230x44x66mm} 259g
2,329.57 ZAR
inc
for 1 Each
1 in Stock
Add
Specifications, Prices & Availability may change without notice. Images are for illustration purposes only. E&OE

Overview

The MT715 is a 200A AC Open Jaw TRMS Clamp Meter with indication on a large backlit negative LCD display, with a clamp jaw opening of 16mm. This open jaw clamp meter is designed to assist in the ease of measuring current in crowded or tight cable areas, as the jaws need only be pushed over the wire to obtain accurate readings. The meter measures 1000V AC/DC, capacitance and resistance measurements, plus a Min and Max mode. The Low Z range function has a low pass filter to eliminate errors caused by “Ghost” voltages, and has features of Non-Contact Voltage detection, diode test function, a continuity buzzer and a built-in flashlight. Housed in a modern double moulded rubber housing with a rugged design for heavy duty use.

Features

  • 6000 count negative LCD display
  • Open Jaw Sensor
  • Ø16mm Cable Clamp size
  • Measures DC voltage and AC voltage up to 1000V
  • Capacitance to 4000μF
  • Temperature measurement -40⁰C to 1000⁰C
  • NCV – Non-Contact Voltage Detector
  • Low input impedance prevents false readings due to “Ghost” Voltage (LoZ)
  • Built-In Flashlight
  • Continuity buzzer and Diode Test
  • Min/Max and Data Hold function
  • Auto Power Off

Specifications

Function Range Resolution Accuracy
AC Current 200A 100mA ±(3% + 5 Digits)
DC Voltage 6.000V – 1000V 1mV ±(1.0% + 2 Digits)
AC Voltage 6.000V – 1000V 1mV ±(1.2% + 2 Digits)
Resistance 600.0Ω– 60.00MΩ 0.1Ω ±(1.5% + 4 Digits)
Capacitance 60.00nF – 4mF 0.01nF ±(3.0% + 5 Digits)
True RMS Measurements ACV, ACA
AC Bandwidth 2KHz
Digital Display 6000
Non-Contact Voltage (NCV) Yes
Overrange Indication Yes
Continuity Yes
Diode Test Yes
Jaw Size 16mm Open Jaw
Input Impedance >10MΩ DCV & >10MΩ VAC
Min Max Yes
Data Hold Yes
Back Light Yes
Enclosure Double injection moulding
Low Battery Indication Yes
Batteries 2 x AAA
Weight 259g
Dimensions 230 x 44 x 66mm
Safety Specs IEC61010-1 CAT IV 600V

Downloads

PDF File
611.21 KB
PDF File
1.01 MB