Catalog > Consumer Electronics > Security & Alarms > Alarms > Miscellaneous RGBW Controller 2 ZW5 RGBW 2 ZW5 Controller FGRGBWM-442 Fibaro LED Light Controller 2, Compatible with RGB/RGBW LEDS & 12-24V Light Sources & with Z Wave Plus, 4 x I/P 0-10V (Configurable Pull-up) or Binary, 4 x O/P : PWM 244Hz 1,298.62 ZAR inc for 1 Each 0 in Stock Add Specifications, Prices & Availability may change without notice. Images are for illustration purposes only. E&OE Features PWM output signal - control LED, RGB, RGBW, halogen lights and other resistive loads Controlled devices can be supplied with 12 or 24 V DC Inputs support momentary switches / switches and 0-10 V analog sensors Measure active power and energy consumed by the load Z-Wave Plus Specifications Power supply: 12/24V DC ±10% Rated load current: 6A for channel,12A total for all outputs Power output: 144W combined for 12V, 288W combined for 24V Inputs: 4 inputs, 0-10V (configurable pull-up) or binary Outputs: 4 outputs, PWM PWM frequency: 244Hz Maximum length of wires: 2m Operating temperature: 0–40°C (32–104°F) Storage temperature: -40–60°C (-40–140°F) Radio protocol: Z-Wave (500 series chip) Radio frequency: 868.4 / 869.85 MHz EU Transmit power: EIRP max. +2dBm Range: up to 50m (164 ft) outdoors, up to 40m (131 ft) indoors (depending on terrain and building structure) Recommended wire cross-section area: 0.2–2.0mm2 (24–14 AWG)(depending on load current) Dimensions (Length x Width x Height): 42.35 x 36.90 x 17.5 mm(1.67" x 1.5" x 0.6") Compliance with EU directives: RoHS 2011/65/EURED 2014/53/EU Downloads User Manual - FGRGBWM-442 PDF File 756.45 KB Quick Guide - FGRGBWM-442 PDF File 6.12 MB