Catalog > Consumer Electronics > Security & Alarms > Alarms > Miscellaneous Smart Implant Smart Implant FGBS-222 Fibaro Smart Implant allows to Enhance the Functionality of Wired Sensors and other Devices by Adding Z-Wave Network Communication. 654.27 ZAR inc for 1 Each 0 in Stock Add Specifications, Prices & Availability may change without notice. Images are for illustration purposes only. E&OE Features Compatible with any certified Z-Wave or Z-Wave Plus controller Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption Works as a Z-Wave signal repeater Built-in temperature sensor Allows for connecting sensors: 6 DS18B20 sensors 1 DHT sensor 2 x 2-wire analog sensor 2 x 3-wire analog sensor 2 x binary sensors Z-Wave Plus Specifications Power supply: 9-30V DC ±10% Inputs: two 0-10V or digital inputs 1 serial 1-wire input Outputs: 2 potential-free outputs Supported digital sensors: 6 DS18B20 or 1 DHT22 Maximum current on outputs: 150mA Maximum voltage on outputs: 30V DC / 20V AC ±5% Built-in temperature sensor measurement range: -55°C–126°C (-67°F–259°F) Operating temperature: 0–40°C (32–104°F) Radio protocol: Z-Wave (500 series chip) Radio frequency: 868.4 or 869.8 MHz EU; 908.4, 908.42 or 916.0 MHz US; 921.4 or 919.8 MHz ANZ; 869.0 MHz RU Radio transmit power: max. 7 dBm (EIRP) Range: up to 50m (164 ft) outdoors, up to 40m (131 ft) indoors (depending on terrain and building structure) Dimensions(Length x Width x Height): 29 x 18 x 13 mm (1.14” x 0.71” x 0.51”) Compliance with EU directives: RoHS 2011/65/EU, RED 2014/53/EU Downloads User Manual - FGBS-222 PDF File 768.82 KB