1. Catalog
    2. >
  2. Consumer Electronics
    3. >
  3. Security & Alarms
    4. >
  4. Alarms
    5. >
  5. Electric Fence
Druid 28LCD - Druid 28 LCD Energizer {E-DRUID/28/LCD} [EF DRUID28LCD-2X3.7J]
Druid 28LCD - Druid 28 LCD Energizer {E-DRUID/28/LCD} [EF DRUID28LCD-2X3.7J]

Energizer Druid 28-LCD 2 and 4 Zone

Druid 28-LCD 2 and 4 Zone Energizer

EF DRUID28LCD-2X3.7J
Druid 28LCD - Druid 28 LCD Energizer {E-DRUID/28/LCD}
Discontinued
Specifications, Prices & Availability may change without notice. Images are for illustration purposes only. E&OE

Overview

The LCD display in the Druid range makes information on the status and performance of the energizer quick and easy to read. Using the Adaptive Power Technology (APT) pioneered by Nemtek, these energizers offer a unique technology to detect how much power a fence can accept and handle before it starts to arc and waste energy. This maximises the power on the fence and minimises false alarms. Synchronisation between energizers can be achieved by using traditional network cabling or by the Druid synchronisation modules which use orbiting satellites and eliminate the need for cabling between the energizers.

Features

  • Two 3.7 Joule independently monitored and controlled zones
  • The robust and flexible design is ideal for commercial, industrial and high-security sites
  • Each zone can be set independently to be on/off or in high/low voltage modes
  • Can be programmed into alarm sensor mode allowing it to be integrated into a separate burglar alarm system
  • Four zones can easily be created by linking two Druid 25LCD energizers together using the Druid four-zone keypad
  • Built-in alarm monitors tampering or faults on the high voltage and earth fence wires
  • Connectable to armed response radio or GSM module
  • Lightning and power surge protection
  • Intelligent power saving to extend battery life
  • Built-in gate alarm input to monitor if the gate is open or closed
  • Optional keypad for controlling and programming the energizer. This allows the user tocontrol the energizer remotely, with up to two keypads
  • The relay expansion card can be used to increase the number of information outputs from the energizer
  • Walk test mode for easy fence testing
  • The LCD background colour changes to easily identify the fence condition

Specifications

  • Enclosure size: L400mm x W270mm x D125mm
  • Weight excluding battery: (7AH) 5.7kg
  • Weight including battery: (7AH) 8.0kg
  • IP rating: IPx4
  • Operating temperatures: -10°C to 50°C
  • Operating humidity: < 80% non-condensing
  • Electrical supply voltage: 240V
  • Typical power consumption (normal operating conditions): 18VA
  • Internal battery 7AH Standby time (fully charged battery): 24hrs
  • High-voltage output Energy (500 Ohms load): 3.7 Joule per zone
  • Open circuit voltage: 9 000V

Downloads

PDF File
1.06 MB