Catalog > Consumer Electronics > Security & Alarms > CCTV Equipment > CCTV Accessories Video Signal BNC I/O Amplifier VIDEO SIGNAL AMPLIFIER T1 Video Signal BNC I/O, Used for Video Signal Remote Cable Transmission Amplification/Balancing 296.40 ZAR inc for 1 Each 2 in Stock Add Specifications, Prices & Availability may change without notice. Images are for illustration purposes only. E&OE Overview Can amplify video signal in a balanced manner, it is used in remote video signal transmission system to raise and balance signal loss and frequency distortior, and compatible with white / black and color video Features Video signal BNC I/O, used for video signal remote cable transmission amplification/balancing A circuit consisting of an independent isolated supplementary three-stage tube pair outputs signals to 75 ohm loads, with color black and white compatibility and flat frequency response. Input voltage: DC12V input/output impedance: 75 ohms Input connector: One BNC Output connector: one BNC Frequency response: adjustable to compensate and amplify coaxial cable distortion Bandwidth (-3 dB):10 Hz to 7.5 MHz. Gain: adjustable, maximum output before trimming 6 dB: 2.5Vp-p. Operating environment: temperature -10°C--+45°C, relative humidity below 90%. Specifications Input voltage: DC12V Input / output load: 75ohm Input connector: 1BNC Output connector: 1BNC Frequency response: adjustable Bandwidth(-3db): 10Hz to 7.5MHz Gain: adjustable and max up to 6dB Max output video voltage: 2.5V Temperature: -10 to 45C Humidity: max up to 90% Downloads Datasheet - VIDEO SIGNAL AMPLIFIER T1 PDF File 125.65 KB