1. Catalog
    2. >
  2. Consumer Electronics
    3. >
  3. Network Communication
    4. >
  4. Ubiquity Wireless Networking
Ubiquiti UniFi-Switch Gen2, 24 Port with 400W PoE, 2x1/10G SFP+ Ethernet Port, Switching Capacity:88 Gbps, Forwarding Rate: 65.472Mpps, 100-240VAC, 50/60 Hz, USP RPS DC Input: 52VDC, 7.69A; 11.5VDC, 2.61A, 442.4x285.4x43.7mm, 4.39kg [UBQ USW-PRO-24-POE-GEN2]
Ubiquiti UniFi-Switch Gen2, 24 Port with 400W PoE, 2x1/10G SFP+ Ethernet Port, Switching Capacity:88 Gbps, Forwarding Rate: 65.472Mpps, 100-240VAC, 50/60 Hz, USP RPS DC Input: 52VDC, 7.69A; 11.5VDC, 2.61A, 442.4x285.4x43.7mm, 4.39kg [UBQ USW-PRO-24-POE-GEN2] Ubiquiti UniFi-Switch Gen2, 24 Port with 400W PoE, 2x1/10G SFP+ Ethernet Port, Switching Capacity:88 Gbps, Forwarding Rate: 65.472Mpps, 100-240VAC, 50/60 Hz, USP RPS DC Input: 52VDC, 7.69A; 11.5VDC, 2.61A, 442.4x285.4x43.7mm, 4.39kg [UBQ USW-PRO-24-POE-GEN2]
Ubiquiti

24 Port Gen2 UniFi-Switch

24 Port Gen2 UniFi-Switch

UBQ USW-PRO-24-POE-GEN2
Ubiquiti UniFi-Switch Gen2, 24 Port with 400W PoE, 2x1/10G SFP+ Ethernet Port, Switching Capacity:88 Gbps, Forwarding Rate: 65.472Mpps, 100-240VAC, 50/60 Hz, USP RPS DC Input: 52VDC, 7.69A; 11.5VDC, 2.61A, 442.4x285.4x43.7mm, 4.39kg
17,711.04 ZAR
inc
for 1 Each
0 in Stock
Add
Specifications, Prices & Availability may change without notice. Images are for illustration purposes only. E&OE

Specifications

Mechanical
Dimensions 442 x 285 x 44 mm (17.4 x 11.2 x 1.7")
Weight Without mounting brackets: 4.3 kg (9.5 lb)
With mounting brackets: 4.4 kg (9.7 lb)
Enclosure material SGCC steel
Hardware
Management interface Ethernet In-Band
Networking interface (24) GbE RJ45 ports
(2) 1/10G SFP+ ports
PoE interface (16) PoE/PoE+ (Pins 1, 2+; 3, 6-)
(8) 60W PoE++; PoE/PoE+ (Pins 1, 2+; 3, 6-) / PoE++ (Pair A 1, 2+; 3, 6-) (Pair B 4, 5+; 7, 8-)
Total non-blocking throughput 44 Gbps
Switching capacity 88 Gbps
Forwarding rate 65.472 Mpps
Power method (1) Universal input, 100—240V AC, 50/60 Hz
(1) USP-RPS DC input, 52V DC, 7.69A; 11.5V DC, 2.61A
Power supply AC/DC, internal, 450W
Supported voltage range 100—240V AC
Max. power consumption 50W (Excluding PoE output)
Total available PoE 400W
Max. PoE wattage per port by PSE PoE+: 32W
PoE++: 64W
Voltage range PoE mode PoE: 44—57V
PoE+: 50—57V
ESD/EMP protection Air: ± 16kV, contact: ± 12kV
LCM display (1) 1.3" touchscreen
Button Factory reset
Shock and vibration ETSI300-019-1.4 Standard
Ambient operating temperature -5 to 40° C (23 to 104° F)
Ambient operating humidity 10 to 90% noncondensing
Certifications CE, FCC, IC
Switching Features
Layer 2 features IGMP snooping
STP / RSTP with priorities and port-level disable
Port isolation
Storm control
Voice VLAN
Port mirroring
LACP port aggregation
Multicast / broadcast rate limiting
MAC address blocking
Flow control
802.1X control
Jumbo frames
Proprietary loop protection
DHCP snooping / guarding
Egress rate limit
LLDP-MED
Port restricted by MAC
Device isolation with ACLs
Layer 3 features DHCP for locally-managed networks
DHCP relay
Inter-VLAN routing between networks on same switch
Static routing between local networks
Network isolation with ACLs
LEDs
System Status
Ethernet PoE
Speed/link/activity
SFP+ Link/activity
RPS Status
Application Requirements
UniFi Network Version 5.10.5 and later

Downloads

PDF File
2.47 MB