1. Catalog
    2. >
  2. Consumer Electronics
    3. >
  3. Network Communication
An Industrial Canopen To Modbus Protocol Converter. It Operates As A Canopen Slave With Can, Rs485, And 10/100m Ethernet Interfaces, Enabling Integration Of Modbus Devices Into Canopen Systems [USR PX511 CANOPEN TO MODBUS CON]
An Industrial Canopen To Modbus Protocol Converter. It Operates As A Canopen Slave With Can, Rs485, And 10/100m Ethernet Interfaces, Enabling Integration Of Modbus Devices Into Canopen Systems [USR PX511 CANOPEN TO MODBUS CON]

Modbus Protocol Converter

Modbus Protocol Converter Protocol Converter

USR PX511 CANOPEN TO MODBUS CON
An Industrial Canopen To Modbus Protocol Converter. It Operates As A Canopen Slave With Can, Rs485, And 10/100m Ethernet Interfaces, Enabling Integration Of Modbus Devices Into Canopen Systems
1,641.60 ZAR
inc
for 1 Each
2 in Stock
Add
Specifications, Prices & Availability may change without notice. Images are for illustration purposes only. E&OE

Overview

Industrial Protocol Gateway

The USR-PX511 is an advanced protocol converter from the USR-PX series, specializing in converting CANopen Master protocols  to Modbus TCP Master/Slave or Modbus RTU Master/Slave protocols . The device acts as a Host (Master) in a CANopen network, allowing it to collect and exchange data with CANopen Slave devices (servo drives, sensors, I/O systems) and share this data with Modbus-enabled PLC or SCADA systems. It provides high-performance, closed-loop communication.

Multifunctional interface and industrial durability

The USR-PX511 converter features a CAN port  (screw-type connector), one standard RJ4 Ethernet port  (10/100 Mbps), and an RS485 serial interface (terminal block). Like other models in the series, it features enhanced industrial durability with EMC Level 3 protection  (ESD, Surge, EFT) and galvanic isolation  for all interfaces and power supply. Its aluminum housing and wide operating temperature range of -40°C to +85°C  ensure reliability in the harshest operating environments.

Easy setup and power supply

The CANopen device (object dictionary) is configured and managed using dedicated PC software and an EDS file. The device is powered by a wide voltage range of 9-36V DC  via a safe, pluggable screw connector (terminal block) with reverse polarity protection. DIN rail mounting  and compact dimensions (same as the PX520/PX530) facilitate quick integration into control cabinets.

Features

  • protocol conversion: CANopen Master to Modbus TCP Master/Slave and Modbus RTU Master/Slave
  • communication interfaces:  1x CAN Port (Master), 1x Ethernet RJ45 (10/100 Mbps), 1x RS485
  • Power supply and housing:  wide range DC 9-36V . Aluminum housing, DIN rail mounting
  • Industrial resistance:  operating temperature -40°C ~ +85°C . EMC Level 3 protection and galvanic isolation  for all ports
  • diagnostics:  status LEDs ( PWR , WORK , 485 , CAN ), Reload button , Type-C interface  for debugging

Specifications

Communication Interfaces
CAN 1 × CAN Port (Master), Terminal Block
Ethernet 1 × RJ45 port, 10/100 Mbps (Auto MDI/MDIX)
Serial Interface 1 × RS485 (Terminal Block 3.81 × 3P), 600~230.4K bps
Protocols CANopen Master to Modbus TCP/RTU Master/Slave
Power Supply and Physical Parameters
Input Power DC 9-36V (Terminal Block 5.08 × 2P)
Power consumption  Datasheet required for exact values
Dimensions (with DIN mounting) 137.3 × 30 × 109.3 mm
Installation DIN rail mounting, aluminum housing
Operating/Storage Temperature -40°C ~ +85°C / -40°C ~ +105°C
Humidity  5% ~ 95% (non-condensing)
Protection and Diagnostics
EMC protection (ESD, Surge, EFT) IEC 61000-4-2/4/5 Level 3 (Galvanic isolation)
CAN terminating resistor Datasheet required for details
Status LEDs PWR, WORK, 485, CAN
Reload/Debug button Factory Reset (3-15s) / Type-C Debug Port

The set includes:

  • 1 x USR-PX511 Protocol Converter
  • 1 x Terminal Block (for power supply, RS485 and CAN)
  • 1 x original packaging 

Downloads

PDF File
719.35 KB