8 Inputs to communicate separate alarm conditions

• Each input can be triggered to send an SMS to up to 16 Cellphone numbers
• The time delay before the input is triggered can be set for each input
• Separate messages can be configured for On and Off states of the input signal
• Messages to be send can be programmed by the user
• On or Off states can both be reported to predefined cellphone numbers.
• Reporting can be disabled for an input
• The states of the inputs can be requested from the unit by SMS
• Monitoring of the inputs can be controlled using different modes
• Inputs can act as counters
• Inputs can act as Run Hour meters

4 Analog Inputs

• Each analog input can perform a analog measurement and report 2 High alarmsand 2 low alarms per input.
• Time delay can be configured for each alarm
• Analog alarm levels can control relay outputs to enable analog control functionality.
• Analog changes can be logged to a server via GPRS communications.

8 Outputs to control any electrical device

• Outputs can be controlled by cellphone using SMS on, off or pulse
• Output controls can be scheduled
• The duration of the pulse can be programmed for each output
• Outputs can be set to follow the state of an input
• Output can be set to switch on when the unit is dialed
• Status of an output can be requested from the unit by SMS
• Analog Limits can control the switching of outputs
• Own text can be used to control outputs

Monitor AC power using the charger input

• AC power can be monitored by using the charger input.
• SMS can be send to up to 16 numbers when an power failure occur and when the power return

Monitor the battery status

• The battery status can be monitored by the system.
• SMS can be send to up to 16 numbers when the battery go faulty.
• The battery is monitored by disconnecting it from the main supply and to measure the battery voltage while connected to a load.

Remote Program Commands via SMS / GPRS * The setting of configuration parameters remotely by SMS or GPRS.

Remote Control Program Commands via SMS / GPRS

• The execution of Control Commands remotely by SMS or GPRS.

Scheduled Commands

• The execution of commands can be scheduled

SD Card Logger

• The system will log events configured to be logged
• Logged events will be time stamped from the Cell phones Date/Time
• Events can be downloaded into a comma delimited file for analysis

Monitor Mode

• Monitor mode is used to activate monitor functions
• Monitor Mode can be set by SMS or Monitor mode Inputs

LCD Add on

• Display Status information on LCD display
• Multiple pages on LCD Display
• Pages configurable to user requirements

Custom Status Message

• Custom status reply messages can be configured

Configuration tool to configure unit to user requirements

• All parameters can be set from configuration tool.
• Remote programming possible from the configuration tool
• Save and Load from files for backup