Catalog > Electro-Mechanical Components > Relays > Relay Sockets Catalog > Consumer Electronics > Kits > DIY Kits Optical Fingerprint Reader Sensor Module Optical Fingerprint Reader Sensor Module BMT FPM10A FINGERPRINT MODULE Optical Fingerprint Reader Sensor Module for Arduino 593.79 ZAR inc for 1 Each 1 in Stock Add Specifications, Prices & Availability may change without notice. Images are for illustration purposes only. E&OE Features Simple to use: as long as there is a serial microcontroller, embedded can operate the module, MSP430, 51, AVR, PIC, STM32, ARM, FPGA, pcDuino, etc. can operate the module. You can also use the computer’s serial port to control the module through the serial port. The product is composed of optical fingerprint sensor, high speed DSP processor, high performance fingerprint matching algorithm, super large capacity FLASH chip and other hardware and software components. The fingerprint module has the functions of fingerprint collection, fingerprint registration, fingerprint matching and fingerprint search. Power supply voltage: DC from 3.6 V to 6.0 V. Power supply current: working current: < 120 ma. 5.Peak current: < 140 ma. 6.Fingerprint image input time: < 1.0 seconds. 7.Window size: 14 x 18 mm. Specifications Supply voltage: DC 3.6 ~ 6.0V / 3.3V Supplying Supply Current: Current: <120mA Peak current: <140mA Fingerprint image time: <1.0 seconds Window size: 14 ╳ 18 mm Matching mode: Match mode (1:1) Search mode (1: N) Signature File: 256 bytes Template files: 512 bytes Storage capacity: 1,000 Safety level: five (from low to high: 1,2,3,4,5) False Accept Rate (FAR): <0.001% (security level 3) False Reject Rate (FRR): <1.0% (security level 3) Search time: <1.0 seconds (1:500, the mean) C Interface: UART (TTL logic level) or USB2.0 / USB1.1 Communication baud rate (UART): (9600 ╳ N) bps where N = 1 ~ 12 (default value N = 6, ie 57600bps) Working environment: Temperature: -20 ℃ - +50 ℃ Relative Humidity: 40% RH-85% RH (non-condensing) Storage environment: Temperature: -40 ℃ - +85 ℃ Relative humidity: <85% H (non-condensing) Dimensions (L x W x H): Split: Fingerprint sensor: 56 x 20 x 21.5mm One: 56 x 20 x 21.5mm Hardware connection: Module via a serial communication interface, directly with 3.3V or 5V power microcontroller communication: Module data transmission feet (2 Foot TD) connected to the data bit machine receiving end (RXD), data receiver module feet (3 feet RD) connected to the data sender bit machine (TXD). For the RS-232 level (for example: PC machine) for PC communication, increase the level conversion between the module and the host computer Circuitry (e.g.: MAX232 circuit) References Guide to Fingerprint Sensor Module with Arduino (FPM10A)