Catalog > Consumer Electronics > Kits > Various Kits SIM800L GPRS GSM Module SIM800L GPRS GSM Module HKD SIM800L GSM/GPRS MODULE+ANT SIM800L GPRS GSM Module with Antenna and Tested Refurbished Chip (Simcom Module Is Not New) 138.78 ZAR inc for 1 Each 62 in Stock Add Specifications, Prices & Availability may change without notice. Images are for illustration purposes only. E&OE Overview SIM800L GSM GPRS Module Board MicroSIM Transfer Card Core Board With AntennaThe SIM800L module supports quad-band GSM/GPRS network, available for GPRS and SMS message data remote transmission. The SIM800L communicates with microcontroller via UART port, supports command including 3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands. It also has built-in level translation, so it can work with microcontroller of higher voltage than 2.8V default. Besides, the board also supports A-GPS technique which is called mobile positioning and gets position by mobile network. This features make it can also be a tracker module. Specifications TTL Serial Port, Directly Connect to the Microcontroller. Charge the Module, It will Automatically Boot and Search for Network. Onboard Signal Indicator will always be flashing. It flashes slowly when there is a signal; it flashes quickly when there is no signal. Chip: SIM800L Voltage: DC 3.7-4.2V(1A CURRENT PEAK) Support Networks: Quad-band Network Module Size: 2.5 X 2.3CM SIM800L GPRS GSM Module with Antenna Cable Quad-band 850/900/1800/1900MHZ Used in GSM Based Projects, GPS Based Projects, Robotics Projects, OR 8051/AVR/ARM/PIC/Arduino/Raspberry-PI Based Projects GPRS Multi-Slot CLASS12 Connectivity: Max. 85.6KBPS(DOWN-LOAD/UP-LOAD) GPRS Mobile Station Class B Controlled by at command (3GPP TS 27.007, 27.005 and SIMCOM ENHANCED AT COMMANDS) Supports Real Time Clock Supply Voltage Range 3.4V ~ 4.4V Supports A-GPS Supports 3.0V TO 5.0V Logic Level Low Power Consumption, 1MA in Sleep Mode