1. Catalog
    2. >
  2. Consumer Electronics
    3. >
  3. Power Supplies
    4. >
  4. Battery Chargers
CHARGER LEAD-ACID 2X12V OR 24V 2A @ EACH O/P IP30 28X127X80mm I/P CURRENT MAX 0.45A @ 230V {TS-180} [OPTIMATE PRO 2]
CHARGER LEAD-ACID 2X12V OR 24V 2A @ EACH O/P IP30 28X127X80mm I/P CURRENT MAX 0.45A @ 230V {TS-180} [OPTIMATE PRO 2]
Optimate

Lead Acid Battery Charger

Lead Acid Battery Charger

OPTIMATE PRO 2
CHARGER LEAD-ACID 2X12V OR 24V 2A @ EACH O/P IP30 28X127X80mm I/P CURRENT MAX 0.45A @ 230V {TS-180}
Discontinued
Specifications, Prices & Availability may change without notice. Images are for illustration purposes only. E&OE

Overview

The new OptiMate PRO-2 is an affordable all-in-one dual-battery care centre for professional use on motorcycle and other leisure and power sports batteries. Diagnostics, charging, testing and technically correct activation charging for brand new MF batteries, in a single device. Just connect one or two (even dissimilar) 12V batteries and its radically new ampmatic™ microprocessor, the result of more than 15 years experience, optimally sets and continually adjusts the bulk charge current to best suit the evolving condition of each battery. It is also possible to charge two 12V batteries in series.

An enhanced multi-stage version of the acclaimed OptiMate desulphation action automatically recovers most badly neglected, otherwise “dead” batteries and dead cells are identified and signaled after 10 minutes of connection. The affordable new OptiMate PRO-2. Total professional battery optimisation

Specifications

  • Recommended for AGM/MF, ‘Classical’, GEL and spiral cell batteries : from 2Ah to 100Ah (48 hour charge)
  • Programme control : ampmatic™ microprocessor
  • Input current max. : 0,45A @ 230V
  • Indicative annual energy cost : 1 (continuous maintenance)
  • Reverse drain current : less than 1mA
  • Output current (bulk charge) : 0,4A – 2A at each output
  • Automatic Desulphation : Multistage (high voltage, turbo and pulsed mode)
  • Charge time limit : 48 hours (maintenance time: unlimited)
  • Maintain / test cycles : 30 min/30 min (alternating hourly)
  • Charge retention test : 5 possible results from ‘good’ to ‘bad’
  • Size : 287 x 127 x 80mm
  • Weight : 3,4kg
  • Enclosure Classification : IP30
  • Mounting : Easy direct wall mounting
  • Input cable length : 2m
  • Output cable length : 2 x 2,65m (incl. extensions, excl. connection sets)
  • Included Accessories :
    • 2 x TM-71 fused eyelet set, weather protected
    • 2 x TM-74 clamps set for bench charging
    • 2 x TM-73 extension cable
  • Operation ambient temperature range : 0°C / +40°C
  • Warranty : 2 years

Downloads

PDF File
876.24 KB