1. Catalog
    2. >
  2. Cables and Accessories
    3. >
  3. UTP / FTP
24 AWG 4pair Solid Cat5E UTP High Speed Data Transmision Ethernet Cable with Halogen Free Outer Jacket for Stationary Applications [LAPP 2170296]
24 AWG 4pair Solid Cat5E UTP High Speed Data Transmision Ethernet Cable with Halogen Free Outer Jacket for Stationary Applications [LAPP 2170296]

Cat5 Ethernet Cable

UTP Cat5 Ethernet Cable

LAPP 2170296
24 AWG 4pair Solid Cat5E UTP High Speed Data Transmision Ethernet Cable with Halogen Free Outer Jacket for Stationary Applications
29.23 ZAR
inc
for 1 Each
0 in Stock
Add
Specifications, Prices & Availability may change without notice. Images are for illustration purposes only. E&OE

Overview

ETHERLINE® 4 pair cables for stationary applications are suitable for CAT.5e data transmission. Designed with a foil and braid shield, the cable is protected against EMI and can be used in areas where reliable data transmission is key. The cable is available with a PUR or halogen-free jacket, or with a double halogen-free inner and outer jacket.

Stationary applications; industrial field and cell level networking; PLCs, sensors, and other network devices; dry and damp rooms

Specifications

  • Conductor : Solid bare Copper Wire, 0.51 mmø; (24AWG)
  • Insulation : Foam-skin, core diameter max. 1.0 mm
  • Stranding : cores twisted to pairs, pairs twisted to cable core
  • Screening : Aluminium laminated plastic foil, braid of tinned copper wires, coverage 85 % ± 5
  • Sheath : Halogen free compound, HM 2 in acc. to VDE 0207, water blue RAL 5021
  • Marking on the sheath : LAPP KABEL STUTTGART EtherLine®-H CAT5e 4 x 2 x 24AWG ROHS ART. 2170296
  • Colour of printing : Black
  • Colour code : Brown

Electrical Specifications

  • DC resistance (loop) : 192Ω/km
  • Insulation resistance : 5GΩ/km
  • Mutual capacitance at 800KHz : 48nF/km
  • Impedance at 1-100MHz : 100±15Ω
  • Nominal velocity of propagation : 0,77c
  • Signal delay : 5.5 ns/m
  • Transfer impedance at 20 MHz : 5 mΩ/m
  • Operating voltage (not for power purposes) : 125V
  • Test voltage
    • core/core : 1000V
    • core/screen : 500V

Mechanical and Thermal Specifications

  • Minimum bending radius : 50mm
  • Permissible temperature range
    • during installation : -5°C to 60°C
    • after installation : -30°C to 80°C
  • Maximum pulling force
    • during installation : 130N
    • after installation : 65N
  • Fire load : 0.33 kWh/m
  • Flame propagation : Flame Retardant acc. to VDE 0482, part 265-2-1 / IEC 60332-1

Downloads

PDF File
7.40 MB