Catalog > Test and Measurement > Test and Measurement Instruments > Special Function Testers > Miscellaneous Testers Networks The MicroScanner2 Professional Kit Networks MicroScanner2 Professional Kit FLUKE MS2-KIT Fluke Networks The MicroScanner2 Professional Kit, Cable Verifier with IntelliTone Pro 200 Probe, Test Connectors:Twisted-Pair: UTP, FTP, SSTP 8-Pin Modular Jack, Length (460m or1500 ft), Wiremap to TIA-568A/B 38,674.50 ZAR inc for 1 Each 0 in Stock Add Specifications, Prices & Availability may change without notice. Images are for illustration purposes only. E&OE Overview The MicroScanner2 Cable Verifier helps find common errors quickly, displaying results from what were four different test modes all at once on its oversized, backlit LCD display: graphical wire map, pair lengths, distance to fault, cable ID, and far-end device. With the included IntelliTone™ Pro 200 probe, it locates and traces virtually any cable or wire pair via digital and analog toning. The MicroScanner2’s integrated RJ11, RJ45, and coax test ports support virtually any type of low-voltage cable testing, with no need for awkward adapters. The end result is reduced test time and technician error — which makes high-quality installations more efficient and troubleshooting easier. Features Wire map, length, cable ID, distance to fault on one screen Tests common media types (RJ11, RJ45, coax) without adapters VDV Service Detection verifies 10/100/1000 Ethernet, POTS, and PoE Locate and trace cable or wire pairs with IntelliTone™ Pro 200 Specifications Environmental specifications Operating temperature 32 °F to 113 °F (0 °C to 45 °C) Storage temperature -4 °F to +140 °F (-20 °C to +60 °C) Operating relative humidity (% RH without condensation) 90 % (50 °F to 95 °F 10 °C to 35 °C)75 % (95 °F to 113 °F 35 °C to 45 °C) Shock and vibration Random, 2 g, 5 Hz-500 Hz (Class 2)1 m drop test with and without wiremap adapter attached Safety IEC 61010-1 3rd Edition Altitude 4,000 m; Storage: 12,000 m EMC IEC 61326-1 General specifications Test connectors Shielded 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs. MicroScanner2: F-connector for coaxial cable. Power Battery type: 2 AA (NEDA 15A, IEC LR6) alkaline batteriesBattery life: 20 hours of typical useOther compatible battery types: 2 AA photo lithium, NIMH, NICAD Dimensions and weight (with batteries installed and wiremap adapter attached) 3 in x 6.4in x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm)MicroScanner2: 10.6 oz (300 g) Display Monochrome LCD with backlight Test modes Cable test Measures length, verifies wiremap, identifies remote ID locators, and detects Ethernet ports. MicroScanner PoE also shows HIGH Ω when the resistance of the cable is more than 12.5 Ω. Displays results on one screen. Tone Generates Intellitone™ and normal analog toning signals PoE MicroScanner2: Solicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devices Performance specifications Cable types tested Twisted pair: UTP, FTP, SSTPCoaxial (MicroScanner2): 75 Ω, 50 Ω, 93 Ω Length test Range: 460 m (1500 ft)Resolution: 0.3 m (1 ft)Typical accuracy: ± 4% or 0.6 m (2 ft) whichever is greater. NVP uncertainty is an additional error.Calibration: User-settable NVP for twisted pair and coax (MicroScanner2). Can determine actual NVP with known length of cable. Wiremap test Detects single-wire faults, shorts, miswires, split pairs, and up to seven far-end adapter IDs. The wiremap is drawn with proportional length to visually indicate the approximate location of faults. Ethernet port detection MicroScanner2: Detects the advertised speed of 802.3 Ethernet ports with speeds of 10 Mbps, 100 Mbps, and 1 Gbps. Tone generator Supports toning and cable mapping with a Fluke Networks digital IntelliTone™ probe. Generates four tones compatible with typical analog probes. SmartTone™ feature gives positive identification of cables in bundles when using an IntelliTone or an analog probe. Downloads Datasheet - FLUKE MS2-KIT PDF File 418.77 KB