Supported Peripherals:

• Paradox – MG5050, MG5050+*, SP6000, SP6000+**, SP65, EVO192 * Minimum panel firmware v1.11.001 ** Minimum panel firmware v1.10.004
• Texecom – Elite 24, Elite 48*, Elite 64,Elite 64-W, Elite 64-W LIVE, Elite 88, Elite 168, Elite 640* *Coming soon
• IDS – 806*, X16*, X64*, X64 Serial* * Requires an adapter board – sold separately.
• Orisec – ZP-20*, ZP-40*, ZP-100* * Coming soon
   
• Honeywell – Galaxy G2* * Coming soon
• Pyronix – * Coming soon

Peripheral Connection:

• Protocols – Serial & Keybus depending on peripheral make & model
• Standard Cable Length – 1.5m
• Maximum Cable Length – 3m
• Connectors – 1 x 4 Pin white Molex connector, 1 x 5 Pin white Molex Connector.

Remote Connect Serial Bridge:

• Software Supported – Babyware, Wintex, IDSwift

Mechanical Specifications:

• Packaged Weight – 195g.
• Packaged Dimensions – 205 x 52 x 46 mm.
• Device Weight – 111g.
• Cable Weight – 40g.
• Device dimensions – 200 x 50 x 20 mm.
• Enclosure Material – ABS – Resin MG47F.
• Status Indicator – RGB Led.

Tamper Detection & Prevention:

• Enclosure – Designed to be tamper resistant.
• Wall Mount – Contains tamper breakaway tab.
• Antennas – Tamper proof internal antennas for 0G, 4G and Wifi.
• Tamper Detection – Optical sensor which sends alerts to Olarm APP and over Contact ID.

Power Supply:

• Voltage – 7 to 24VDC.
• Current – 100 mA (typical), 250 mA (max) @ 12VDC.

Internal Battery:

• Battery – 3.7V LiPo 1300mAh – 703845 or smaller.
• Connector – JST2.
• Battery Holder Dimensions – 8 x 38 x 45 mm.
• (Battery not included, Sold Separately)

Operating Conditions:

• Temperature –
• Humidity –

Connectivity:

• 4G, 2G & Wifi – Simultaneous multi-path routing via both channels.
• Olarm 0G – Backup routing on LoRaWAN.

Mobile Connectivity – 4G & 2G:

• Antenna Type – Tamper proof internal & optional external.
• External Antenna Connector – SMA Female, Tamper protected, SMA Male Antenna not included.
• Mobile Network Switching – Typical under 60 seconds depending on coverage & networks.
• 2G and/or 4G depending on model & coverage.

Olarm MAX A:

• Regions – South Africa, Africa & Europe
• LTE – Category 1
• LTE-FDD Frequency Bands – B1/3/5/7/8/20/28
• GSM Frequency Bands – B3/8

Olarm MAX G:

• Regions – Global
• LTE – Category 1
• LTE-FDD Frequency Bands – B1/2/3/4/5/7/8/12/13/17/18/19/20/25/26/28/66
• LTE-TDD Frequency Bands – B34/38/39/40/41
• GSM Frequency Bands – B2/3/5/8

Sim Cards:

• South Africa – 2 x Olarm managed local SIM cards – Vodacom & MTN
• UK – 2 x Olarm managed SIM cards – EE & KPN World SIM
• Global – 1 x Olarm managed World SIM card

Wifi – 2.4Ghz:

• Wifi Standards –
• Center Frequency Range of Operating Channel –
• Antenna Type –
• Data Rate – 20Mhz – (11b: 1, 2, 5.5 and 11 Mbps), (11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps), (11n: MCS0-7, 72.2 Mbps (Max))
• Data Rate – 40Mhz – 11n: MCS0-7, 150 Mbps (Max)
• Tx Power: 13 to 19.5 dB (Data rate dependent)
• Rx Sensitivity: -69 to -97 dBm (Data rate dependent)
• Encryption – WPA2-PSK
• WPS Setup – Yes

0G / LPWAN Connectivity:

• Antenna Type – Tamper Proof Internal
• External Antenna Connector – None
• Mode – Backup to 4G & Wifi
• 0G Technologies – LoRaWAN
• LoRaWAN frequency bands – IN865, EU868, AU915, US915, KR920, RU864, AS923-1/2/3/4

Encryption – TLS 1.2 / AES-128

Configuration – Plug-and-play zero configuration via scanning the device QR Code from within the Olarm APP.

Olarm APP users – Unlimited  (The Olarm MAX will require an active subscription to function – This can be purchased directly from the Olarm APP)

Included in the Box:

• 1x Olarm MAX
• 1x Tamper proof wall mount
• Mounting hardware
• 1x Reversible 1.5m peripheral cable

Certifications, Accreditations & Test Reports:

• Alarm Transmission System:
  • • EN 50131-10
    • EN 50136-2
• Safety & Health:
  • • EN 62368-1:2014+A11: (2017)
    • IEC 62368-1: (2014)
• RF Exposure / SAR:
  • • EN 62311:2022
• Electromagnetic Compatibility: 
  • • ETSI EN 301 489-1: V2.2.3 (2019-11)
    • ETSI EN 301 489-3: V2.1.1 (2019-03)
    • ETSI EN 301 489-17: V3.2.4 (2020-09)
    • ETSI EN 301 489-19: V2.1.1
    • ETSI EN 301 489-52: V1.1.0 (2016-11)
    • EN 50130-4: 2011+A1:2014
• Radio Spectrum Efficiency:
  • ETSI EN 301 511: V12.5.1 (2017-03)
  • ETSI TS 151 010-1 V12.8.0 (2016-05)
  • ETSI EN 301 908-1: V15.1.1 (2021-09)
  • ETSI EN 301 908-13: V13.2.1 (2022-02)
  • ETSI EN 300 220-1: V3.1.1 (2017-02)
  • ETSI EN 300 220-2: V3.2.1 (2018-06)
  • ETSI EN 300 328: V2.2.2 (2019-07)
  • ETSI EN 303 413: V1.2.1 (2021-04)
  • https://olarm.com/products/olarm-max