Tenda's TEF1118P is a 18 x Port 10/100Mbps Gigabit switch with 16 x 802.3af/at PoE ports and 1 x Gigabit / SFP Combo uplink port. The switch offers a maximum PoE power budget of 135W , up to 30W per port. This can supply power to and exchange data with AP's, IP cameras together with IP phones supporting the 802.3af/at standard. It also provides simple management modes such as CCTV (QOS on ports 1-8), VLAN (Port Isolation) and Extender mode (250m PoE at 10mbps). The switch also provides 6KV lightning protection.

Standard & Protocol: IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3af MTBF: ≥100,000 hours

Indicator

• 16 x Link/Act per device
• 1x G1 Link/Act per device
• 1x SFP Link/Act per device
• 1x PoE-MAX per device
• 1x Power per device

Interface

• 16x 10/100Base-TX ports (Data/Power)
• 1x 10/100/1000Base-T port (Data)
• 1x 1000Base-X SFP port
• Lightning Protection: 6KV
• Store & Forward: Yes
• Exchange capacity: 7.2 Gbit/s
• Packet Forwarding Rate: 5.36Mpps
• MAC Address Table: 4K
• PoE supply management: Port 1 to Port 16 support IEEE802.3at/af POE standard
• PN pass-through: 1 2 4 5 +，3 6 7 8 -
• Input Power AC：100-240V～ 50/60Hz
• Power Consumption: In full configuration：<150W
• PoE Max Power Supply：135W
• Operating Temperature: 0℃~40℃
• Storage Temperature: -40℃~70℃
• Operating Humidity: 10%~90% non-condensing
• Storage Humidity: 5%~90% non-condensing
• Dimensions: 294 x 178 x 44mm (W x D x H)