Catalog > Consumer Electronics > Kits > Kemo Kits Catalog > Consumer Electronics > Kits > Kits (By Function) > Miscellaneous DC + Pulse Converter 110 V/AC or 230 V/AC DC + Pulse Converter 110 V/AC or 230 V/AC KEMO M150 DC + Pulse Converter 110 V/AC or 230 V/AC Module • Function Group : Miscellaneous 461.70 ZAR inc for 1 Each 4 in Stock Add Specifications, Prices & Availability may change without notice. Images are for illustration purposes only. E&OE Overview By connecting this module in series, it is possible to control our power control modules (230 V/AC or 110 V/AC) M012 + M028 (from microcomputers or PCs) with a DC voltage or a pulse width modulation. This module is connected at the spot of the potentiometer. Galvanic separation of the control circuit via optocouplers. Control may be done optionally (at 230 V/AC) 1 - 5 V/DC, 3 - 12 V/DC, 6 - 24 V/DC. Or TTL rectangular pulses 5 V/DC, 1 - 10 kHz pulse width 10 - 90 % PWM (Puls width modulation). Regulation is done by changing the pulse width. Specifications Operating Voltage : 110VAC or 230VAC (is led to the dimmer module via the connections)Output : The module delivers a control voltage for the potentiometer input of the dimmer modules M012, M028 or M028NInput : The module M150 may either be controlled with control DC voltages of 1~5VDC or 3~12VDC or 6~24VDC. Or with TTL pulses with a pulse width modulationFrequency : between 1~10 kHzImpulse voltage : approx. 5VDC, pulse width 10~90% PWM. The power is adjusted with the pulse width 10~90%Input Resistances : control input 1~5VDC > 1,4 k, control input 3~12VDC > 4,1 k, control input 6~24VDC > 9,1 kTTL pulse input : > 1,1 kGalvanic Separation : via an optocoupler between the control inputs and the signal output towards the power control moduleDimensions : approx. 70 x 60 x 23 mm (without fastening straps)