- Print up to 16 colours simultaneously with the included ACE 2 Pro multi-material unit, expandable from a base of 4 colours
- Achieve blazing print speeds of up to 600mm/s on a rigid CoreXY motion system with 20000mm/s² acceleration
- Enjoy a generous 250mm × 250mm × 250mm build volume with fully automatic levelling — no Z-axis compensation needed
- Print with confidence using built-in AI spaghetti detection, filament runout sensing, and power-loss resume
- Control and monitor your prints from anywhere via the Anycubic App, AC Cloud, or the 4.3-inch capacitive touchscreen
Serious multicolour printing, straight out of the box
The Anycubic Kobra S1 ACE 2 Pro Combo 3D printer is a fully enclosed CoreXY 3D printer bundled with the ACE 2 Pro multi-material unit, giving makers, hobbyists, and design professionals a complete system for producing vivid multicolour prints from day one. With a base capacity of 4 colours — expandable to 16 — and a 250mm × 250mm × 250mm build volume, it is built for anyone who wants more than a single-colour machine without building a separate setup from scratch.
Speed and precision that keeps up with your creativity
The Kobra S1 uses a CoreXY construction paired with light-rail X and Y axes, a dual-gear short-range extruder, and a maximum print speed of 600mm/s at up to 20000mm/s² acceleration. Layer thickness runs from 0.08mm to 0.28mm, giving you fine detail when you need it and fast rough drafts when you do not. The standard 0.4mm brass nozzle is quick-detachable and compatible with 0.2mm, 0.6mm, and 0.8mm alternatives, while the hotend reaches up to 320°C and the heated bed reaches up to 120°C — covering PLA, PETG, ABS, ASA, and TPU with ease.
Tired of failed prints ruining your filament and your day?
The Kobra S1 ACE 2 Pro Combo 3D printer addresses the most common printing frustrations with a suite of intelligent safeguards. AI spaghetti detection monitors the chamber camera feed and can skip over problem areas before they ruin an entire job. Automatic filament detection and auto-resume handle runouts without manual intervention, and power-loss recovery picks up exactly where it left off after an unexpected outage. Fully automatic levelling with object-skip and area levelling means the printer arrives ready to print — no manual Z-axis compensation required.
Keep filament dry and prints in perfect condition
The ACE 2 Pro unit is more than a multi-material hub — it actively dries your filament during printing at temperatures up to 65°C, helping to prevent moisture-related print defects. A built-in temperature and humidity sensor monitors conditions inside the unit, while a solenoid valve expels moist air during the drying cycle. The enclosed chamber on the Kobra S1 itself houses an activated carbon air filtration system, keeping your workspace clean when printing with materials like ABS and ASA.
Full control, wherever you are
Manage every aspect of your print from the 4.3-inch capacitive touchscreen on the machine, or connect over 2.4GHz Wi-Fi to use the Anycubic App, Anycubic Slicer Next, or AC Cloud for remote monitoring and control. A built-in chamber camera supports time-lapse photography so you can review print progress at a glance. The printer runs on Kobra OS, supports multilingual setup from first boot, and is compatible with both Anycubic Slicer Next and OrcaSlicer. Quiet mode keeps noise at or below 44dB — considerate for home studios and shared workspaces.