Catalog > Consumer Electronics > Security & Alarms > Alarms > Alarm Systems

Wireless Indoor Smoke/Heat & Carbon Monoxide (CO) Detector with Built-in Siren, Frequency: 868.0~ 868.6MHz, 132×132×31mm, 220g [AJAX FIRE PROTECT PLUS]

Smoke/Heat & Carbon Monoxide (CO) Detector

Smoke/Heat / Carbon Monoxide (CO) Detector

Wireless Indoor Smoke/Heat & Carbon Monoxide (CO) Detector with Built-in Siren, Frequency: 868.0~ 868.6MHz, 132×132×31mm, 220g

Part No: AJAX FIRE PROTECT PLUS

	2 373.60	ZAR
		inc
for 1 Each

(Quoting) Add to Cart

Specifications, Prices & Availability may change without notice. Images are for illustration purposes only. E&OE

Overview

FireProtect Plus

Wireless fire detector with temperature and carbon oxide sensors that monitors security in the room twenty four hours a day and immediately notifies of dangerous CO levels, smoke and sharp jumps in temperature.

Principle of operation

The device detects smoke by means of a camera with a photoelectric sensor. An additional chemical element detects carbon oxide and raises the alarm.

It can operate independently from the hub, emitting a fire alarm by means of a built-in siren. Several detectors indicate an alarm simultaneously.

Installation and set up

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.

Features

The device registers smoke, sharp jumps in temperature, and dangerous CO levels
It can operate independently from Ajax Hub, notifying of danger by means of a built-in siren
The device independently tests the smoke chamber and gives prompt notification of the need to dust

Specifications

Classification : Radio channel smoke detector with temperature sensor and built-in siren
Type of detector : Wireless
Installation method : Indoors
Compatibility : Operates independently or with all Ajax hubs, range extenders, ocBridge Plus, uartBridge
Sensing element : Photoelectric, CO and temperature sensors
Activation threshold : +59°С ±2°С
Type of notification : Sound/light
Volume of built-in siren : 85 dB
Alarm signal delivery time : 0.15 s
False alarm filter : +
Interconnected alarms : +

Power supply

Battery: Two CR2 batteries, 3 V
Backup power supply: battery CR2032
Battery life : Up to 4 years

Jeweller radio technology

Communication range with central unit — up to 1,300 m in an open space
Two-way communication between devices
Operating frequencies — 868.0 - 868.6 MHz
Self-adjusting RF output power — up to 20 mW
Block encryption based on AES algorithm
Detector polling period — 12−300 s

Additional temperature sensor : Available
Operating temperature range : From 0°С to +65°С
Permissible humidity : Up to 80%

Anti-sabotage

Protection against fraud
Jamming detection
Tamper-resistant

Remote setting and testing : +
Dimensions : 132 × 132 × 31 mm
Weight : 220 g
Warranty ; Replacement and repair within 24 months of the date of sale. Batteries are not covered under warranty.

Complete set

FireProtect Plus detector
SmartBracket mounting panel
2 x CR2 batteries (pre-installed)
1 x backup battery CR2032 (pre-installed)
Installation set
User’s guide

Downloads

User Manual - AJAX FIRE PROTECT PLUS

PDF File

255.04 KB