Radio Communication

• Frequency Bands:
• 866.0–866.5 MHz
• 868.0–868.6 MHz
• 868.7–869.2 MHz
• 905.0–926.5 MHz
• 915.85–926.5 MHz
• 921.0–922.0 MHz
• Frequency bands depend on the sales region.
• Maximum Effective Radiated Power (ERP): Up to 20 mW
• Automatic Power Control: Reduces power consumption and noise interference.
• Radio Signal Modulation: GFSK
• Radio Signal Range: Up to 1,700 m in open space
• Encrypted Communication: Block encryption with a dynamic key
• Frequency Hopping: Prevents interception and jamming.
• Wings Communication Technology:
• Two-way communication
• Block encryption with a dynamic key
• Advanced anti-sabotage protection
• Data packet reloading in case of transmission errors
• Photo delivery verification

Detection

• Sensitive Elements: 2 × PIR sensors
• Motion Detection Distance: 3–15 m
• Recommended Installation Height: 0.8–1.3 m
• Horizontal Detection Angle: 90°
• Vertical Detection Angle: Not applicable
• Motion Detection Speed: 0.3–2.0 m/s
• Sensitivity Levels: 3
• Pet Immunity Height: Up to 80 cm
• False Alarm Prevention: LISA and SmartDetect software algorithms
• Temperature Compensation: Effective detection from −25°C to +60°C

Photo Verification

• Photo by Alarm: Camera activates when the detector is armed and motion is detected.
• Photo on Demand: Available, depending on settings; disabled by default.
• Photo by Scenario: Automatically captures images when Ajax fire detectors are triggered; disabled by default.
• Photo by Schedule: Supported on hubs running OS Malevich 2.19 or higher.
• Photo by Arming/Disarming: Automatically captures images when the security state changes.
• Photo Resolution:
• 640 × 352 pixels
• 320 × 176 pixels (default)
• Camera Viewing Angles:
• Horizontal: 105°
• Vertical: 50°
• IR Backlight: Supports night photography and low-light conditions.
• Pictures per Series:
• 1–5 images at 320 × 176 pixels
• 1–3 images at 640 × 352 pixels
• Photo Delivery Time:
• Up to 9 seconds at 320 × 176 pixels
• Up to 20 seconds at 640 × 352 pixels
• TV Distortion (EBU Standard): Barrel distortion of 17%

Installation Recommendations

• Installation Height: 0.8–1.3 m
• Installation Environment: Indoor and outdoor use
• Detector Orientation: Position the lens perpendicular to the expected intrusion path.

Sabotage Protection

• Anti-Masking System: Detects attempts to obstruct, cover or paint the lens.
• Tampering Alarm: Detects attempts to detach the detector or remove it from the mounting panel.
• Protection Against Forgery: Device authentication
• Communication Loss Detection: Within 36 seconds, depending on Jeweller settings

Power Supply

• Battery Type: 4 × CR123A
• Battery Installation: Pre-installed
• Battery Type Classification: Type C
• Calculated Battery Life: Up to 3 years with the “Delay when entering” feature disabled
• Operating Voltage Range: 4–6.4 V DC
• Nominal Operating Voltage: 6 V DC
• Quiescent Current Consumption: 50 µA
• Maximum Current Consumption: 1 A
• Full Battery Capacity: 3,200 mAh
• Low Battery Voltage: 4.65 V DC
• Low Battery Recovery Voltage: 5 V DC
• End-of-Life Battery Voltage: 3.8 V DC
• End-of-Life Battery Capacity: 3,080 mAh
• Battery Manufacturers: Huiderui or Panasonic

Enclosure

• Dimensions: 206 × 108 × 93 mm
• Weight: 470 g
• Operating Temperature: −25°C to +60°C
• Operating Humidity: Up to 95%
• Protection Rating: IP56
• Colour: White

Complete Set

• MotionCam Outdoor (PhOD) Jeweller detector
• Hood for protecting the camera and masking sensors from snow and rain
• SmartBracket mounting panel
• Installation kit
• 4 × CR123A batteries (pre-installed)
• Quick start guide