500g Insulating Polyurethane Resin [RESIN FR453-500G] .::. Communica Online

Catalog > Consumer Electronics > Electro-Chemicals > Adhesives

500g Insulating Polyurethane Resin with Electro Brown Resin 5000-5500mPa.s and Hardner 200-200 mPa.s

Part No: RESIN FR453-500G

(Quoting) Add to Cart

Specifications, Prices & Availability may change without notice. Images are for illustration purposes only. E&OE

FR/453 is filler extended two part Polyurethane Resin
Colour :
- Resin : Electro Brown
- Hardener : Brownish clear
- Mixed : Electro Brown
Viscosity / 25°C :
- Resin : 5 000 — 5 500 mPa.s
- Hardener : 200 — 200 mPa.s
- Mixed : 2 000 — 2 500 mPa.s
Mixing Ratio :
- By Weight : 100 parts of Resin, 25 — 26 parts of Hardener
- By Volume : 100 parts of Resin, 34 — 35 parts of Hardener
Specific Gravity :
- Resin : 1.65 g/cm3
- Hardener : 1.20 g/cm3
Potlife / 25°C : 30 Minutes
Geltime / 25°C : 35 — 40 Minutes
Application : By casting
Setting Time : 1 — 1 1/4 Hours
Exotherm (500ml volume) : Maximum 60°C
Adhesion : To PVC, Aluminium, Lead, Copper : Very good ; To Cleaned, Flamed Polyethylene: Good
Flashpoint : > 200°C
Heat Resistance : Maximum 80°C
Hardness (cured 24h / 25°C) : Shore D: 80 — 85
Dielectric Strength : 21 kV/mm
Resistance :
- To Water, Oil, diluted Acids, Alkaline : Very good
- Solvents: Aromatic I Aliphatic Hydrocarbons : Good
- Esters, Ketons, Chlorinated Hydrocarbons : Not resistant
Hydrolytic Stability : Excellent
Water Absorption : (After 24 hour immersion in distilled water): 0.3 %
Storage Stability : 12 Months stored under dry and cool conditions in sealed packaging
Toxicity : Very low toxicity at ambient temperatures. However, gloves must be worn and adequate ventilation must be ensured during application.

Datasheet - Resin 453

PDF File

37.56 KB