LCD Display Frequency and Duty Cycle [BDD PWM SIGNAL GEN+DISP 0-150KHZ] .::. Communica Online

Catalog > Consumer Electronics > Kits > Various Kits

The PWM Signal Generator With Screen Can Generate A Square Wave Signal For Experimental Development That Involves PWM Dimming and Speed Controlling. It can be controlled via the Serial Protocol TTL (TXD & RXD Pins). Volt: 3.3 - 30 VDC. FREQ: 1HZ – 150 KHZ [BDD PWM SIGNAL GEN+DISP 0-150KHZ]

LCD Display Frequency and Duty Cycle

Frequency / Duty Cycle LCD Display

The PWM Signal Generator With Screen Can Generate A Square Wave Signal For Experimental Development That Involves PWM Dimming and Speed Controlling. It can be controlled via the Serial Protocol TTL (TXD & RXD Pins). Volt: 3.3 - 30 VDC. FREQ: 1HZ – 150 KHZ

Part No: BDD PWM SIGNAL GEN+DISP 0-150KHZ

	89.00	ZAR
		inc
for 1 Each

(Quoting) Add to Cart

Specifications, Prices & Availability may change without notice. Images are for illustration purposes only. E&OE

Specifications

LCD display frequency and duty cycle, very clear, PWM output can be set to the frequency and duty cycle;
Wide frequency range, high precision;
Serial communication, TTL level;

Module Feature:

PWM output, you can set the frequency, duty cycle;
Frequency is divided into four ranges, automatic switching:
XXX (no decimal point): the smallest unit is 1Hz, the value range of 1Hz - 999Hz;
X.XX (decimal point in the hundred) the smallest unit is 0.01Khz, the range of 1.00Khz - 9.99Khz;
XX.X (decimal point in ten): the smallest unit is 0.1Khz; value range of 10.0KHz - 99.9KHz
X.X.X (decimal point in ten and hundred): the smallest unit is 1Khz; value range 1KHz - 150KHz

Frequency display: 100 indicates PWM output 100Hz pulse;

1.01 indicates PWM output 1.01K pulse;
54.1 indicates that the PWM output has a pulse of 54.1 kHz;
1.2.4 indicates that the PWM output is 124 kHz pulse;
Duty cycle range: 0 - 100%;
All set parameters, power-down automatically saved.

Parameter Settings:

The module has four independent keys, used to set the frequency and duty cycle, support touch (increase or decrease a unit) and long press (fast increase or decrease), set the parameters automatically save, power down Not lost.

Module Parameters:

Working voltage: 3.3 - 30V;
Frequency range: 1Hz - 150KHz;
Frequency accuracy: the accuracy in each range is about 2%;
Signal load capacity: the output current can be about 5 - 30ma;
Output amplitude: PWM amplitude equal to the supply voltage;
Ambient temperature: -20 - +70 degree

Application:

Used as a square wave signal generator, generate square wave signal for experimental development and use;
Used to generate a square wave signal that controls the motor driver;
generate adjustable pulse for MCU use;
generate adjustable pulse, control the relevant circuit (PWM dimming speed and other applications).
Serial control (single-chip TTL level communication)

Communication Standard:

9600 bps Data bits: 8
Stop bit: 1
Check digit: none
Flow control: none

1, set the frequency of the PWM

"F101": Set the frequency to 101 HZ (001 to 999)
"F1.05": set the frequency of 1.05 KHZ (1.00 - 9.99)
"F10.5": Set the frequency to 10.5KHZ (10.0 - 99.9)
"F1.0.5": set the frequency of 105KHZ (1.0.0 - 1.5.0)

2, set the PWM duty cycle

"DXXX": set the PWM duty cycle to XXX; (001 - 100)
Such as D050, set the PWM duty cycle is 50%

3, read the set parameters

Send a "read" string to read the set parameters.
Set successfully return: DOWN;
Setup failed to return: FALL.