Catalog > Consumer Electronics > Security & Alarms > Alarms > Alarm Systems

Wireless Indoor Smoke & Heat Detector with Built-in Siren 85dB , Frequency:868.0~868.6MHz, 132×132×31mm, 220g [AJAX FIRE PROTECT]

Smoke & Heat Detector

Wireless Indoor Smoke & Heat Detector with Built-in Siren 85dB , Frequency:868.0~868.6MHz, 132×132×31mm, 220g

Part No: AJAX FIRE PROTECT

	1 581.25	ZAR
		inc
for 1 Each

(Quoting) Add to Cart

Specifications, Prices & Availability may change without notice. Images are for illustration purposes only. E&OE

Features

FireProtect

Wireless fire detector with temperature sensor that monitors security in the room twenty four hours a day and immediately notifies of smoke and sharp jumps in temperature.

Principle of operation

The device detects smoke by means of a camera with photoelectric sensor. If no smoke is emitted, the additional detector registers temperature increase in the room.

It can operate independently from the hub, emitting a fire alarm by means of a built-in siren. Several detectors indicate an alarm simultaneously.

Installation and set up

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.

Specifications

Classification : Radio channel smoke detector with temperature sensor and built-in siren
Type of detector : Wireless
Installation method : Indoors
Compatibility : Operates independently or with all Ajax hubs, range extenders, ocBridge Plus, uartBridge
Sensing element : Photoelectric and temperature sensors
Activation threshold : +59°С ±2°С

Type of notification : Sound/light
Volume of built-in siren : 85 dB
Alarm signal delivery time : 0.15 s
alse alarm filter : +
Interconnected alarms : +

Power supply

Battery: Two CR2 batteries, 3 V
Backup battery: CR2032
Battery life : Up to 4 years

Jeweller radio technology

Communication range with central unit — up to 1,300 m in an open space
Two-way communication between devices
Operating frequencies — 868.0-868.6 MHz
Self-adjusting RF output power — up to 20 mW
Block encryption based on AES algorithm
Detector polling period — 12−300 s

Additional temperature sensor : Available
Operating temperature range : From 0°С to +65°С
Permissible humidity : Up to 80%

Anti-sabotage

Protection against fraud
Jamming detection
Tamper-resistant

Remote setting and testing : +
Dimensions : 132 × 132 × 31 mm
Weight : 220 g
Warranty : Replacement and repair within 24 months of the date of sale. Batteries are not covered under warranty.

Complete set

FireProtect detector
SmartBracket mounting panel
2 x CR2 batteries (pre-installed)
1 x backup battery CR2032 (pre-installed)
Installation set
User’s guide

Downloads

Datasheet - AJAX FIRE PROTECT

PDF File

664.14 KB