6V-90V 10ADC PWM DC Motor Speed Control [BDD PWM DC MOTOR CONTR 10A 6-90V] .::. Communica Online

Catalog > Consumer Electronics > Kits > Various Kits

PWM DC Motor Speed Control 6V-90V 10ADC, Control Voltage: 0-5V (Voltage Control Type, The Speed Of The Motor Can Be Controlled Directly by Inputting 0-5V Signal by PLC or Single Chip Microcomputer) [BDD PWM DC MOTOR CONTR 10A 6-90V]

6V-90V 10ADC PWM DC Motor Speed Control

6V-90V / 10ADC / PWM / DC Motor Speed Control

PWM DC Motor Speed Control 6V-90V 10ADC, Control Voltage: 0-5V (Voltage Control Type, The Speed Of The Motor Can Be Controlled Directly by Inputting 0-5V Signal by PLC or Single Chip Microcomputer)

Part No: BDD PWM DC MOTOR CONTR 10A 6-90V

	75.00	ZAR
		inc
for 1 Each

(Quoting) Add to Cart

Specifications, Prices & Availability may change without notice. Images are for illustration purposes only. E&OE

Overview

DC Motor Speed Controller allows controlling speed of a DC motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 0%-100%. The motor speed controller can provide a continuous current of 10A to your DC motor or other DC load. The circuit also includes a 20A fuse, with reverse connection of power supply and control voltage over-voltage protection function.

Important Notes :

An appropriately rated fuse (rated a little higher than the maximum current you expect to draw) is recommended to ensure safe operation. The controller is with reverse-polarity protection and the fuse will be damaged if connect the supply voltage with wrong polarity. Double check all connections before applying power and always turn off the power supply before making any wiring changes.

Features

Working Voltage: DC6V-DC90V (Ultra-wide Working Voltage)
Control Power: 0.01-1000W (Maximum Peak Current 15A, The current should be reduced for long-term use, Current 5A Power within 300W)
QUIESCENT CURRENT: 0.005A (Standby State) (5MA Standby Current)
PWM Duty Cycle: 0% -100%
PWM Frequency: 15KHZ
Control Voltage: 0-5V (Voltage Control Type, the Speed of the Motor can be controlled directly by inputting 0-5V Signal by PLC or Single Chip Microcomputer) Built-IN Reverse Power Protection, Control Voltage Over-voltage Protection, 20A Fast Blow Ceramic Fuse. Can be directly Controlled with PLC Voltage.

Specifications

Working Voltage: DC6V-DC90V
Pwm Duty Cycle: 0% -100%
Pwm Frequency: 15KHZ
Control Power: 0.01-1000W
Control Voltage: 0-5V
Voltage – Breakdown:3.3V ~ 14.5V
Board Type :DC Motor controller