Diagnostic PROFIBUS D-Sub Connector [MA9D00-42] .::. Communica Online

Catalog > Electro-Mechanical Components > Connectors > Interface Connectors > D-Sub

PROFIBUS 12 Mbit/s 9 Pol D Sub Male Connector only w/LED Indication. Straight (Axial) Cable Entry - 0°. IDC Termination aka EasyConnect® & FastConnect® (Molex 1201035001) [MA9D00-42]

MA9D00-42

Diagnostic PROFIBUS D-Sub Connector

9 Pole Male to Straight Cable entry IDC termination

PROFIBUS 12 Mbit/s 9 Pol D Sub Male Connector only w/LED Indication. Straight (Axial) Cable Entry - 0°. IDC Termination aka EasyConnect® & FastConnect® (Molex 1201035001)

Part No: MA9D00-42

	1 785.05	ZAR
		inc
for 1 Each

(Quoting) Add to Cart

Specifications, Prices & Availability may change without notice. Images are for illustration purposes only. E&OE

Overview

The BradConnectivity PROFIBUS Diagnostic D-Sub connector effectively reduces installation, connection and troubleshooting time with its unique design. The dual cable entry guide makes connections virtually foolproof. Just strip the cable jacket, guide the PROFIBUS 2-conductor cable into the slots, and tighten with a single screw.

PROFIBUS network troubleshooting is also easy thanks to an LED display that pinpoints power, bus, device and termination errors. An integrated port is also included for field diagnostic monitors, analyzers or laptops. The connector is enclosed in a sturdy metal case that contributes to safe and reliable operation by helping to prevent outside interference and damage in harsh applications.

BradConnectivity Diagnostic D-Sub connectors will benefit machine tool, conveyor and material handling applications with its time-saving features. Whether used in motor control centers, variable frequency drives or I/O, they can shorten time to market and reduce production downtime significantly.

Features

All metal construction for harsh environments
Fully shielded for high noise immunity
IDC connections for fast and reliable installations
Captive single-screw mechanism - no loose parts
High transfer rate - 12 MBaud
4 LEDs for fast diagnostics and health status of the bus and device (diagnostic versions only)
Terminator monitor indicates if terminator is missing (diagnostic versions only)
Integrated switchable terminators
Transparent cable slots and covers for high visibility
Integrated programming/diagnostic port (on 90º / 45º formats)
Available in 0º, 45º and 90º formats making connections to various devices easier

Switchable Terminating Resistors :

The switchable terminating resistors are activated by a slide switch accessible from both the side and rear.
With this switch, the OUT Bus can be shut off.
For testing purposes the PROFIBUS components following the connector can be switched off without removing the plug.

Cable Installation :

Loosen the single screw
Lift the contact cover(s)
Push the 2 stripped wires into the wire channel, lining up with the color code : Green Line to "A" and Red Line to "B"
Close the contact cover
Tighten the screw securely and you are finished

Specifications

Orientation : Straight
PROFIBUS : 9 Pole SubD Pin Headers
Programming/Diagnostics : 9 Pole SubD Socket
Insertion (withdrawal) cycles : Min. 200
Cable Type : Solid Core PROFIBUS Type A, EN50170
Cable Diameter : 8mm
Screw/Tightening Torque : 4~40 UNC/0.4Nm
Enclosure Material : Die-Cast Zinc
Temperature Range : -20°C to +75°C
Cable Connection : IDC Technology
Terminating Resistor : Yes, Built-In Switchable
Bus Signals : Dual, IN and OUT
IP Rating : IP67
Material - Connector Body : Die-Cast Zinc
Current (Maximum per Contact) : 4A
Voltage (Maximum) : 30V

Insulation Stripping Lengths:

Outer Sheath : 17mm
Shield : 11mm

Downloads

Datasheet

PDF File

296.30 KB